9.8.2. Replacement of the block of cylinders of the brake mechanism of a forward wheel

It will be required to you: face heads "on 17", "on 19", a special key for the pipelines "on 17", a key hexagon "on 8".
1. Remove a wheel.
3. Turn out a bolt of fastening and remove the holder of a spring of preload of blocks.
4. Turn out two bolts of fastening …
5. … also remove a bracket of the forward brake mechanism.
6. Weaken an inhaling of the union of a brake hose.
7. Turn out the top bolt …
8. … also weaken the lower bolt of fastening of a brake support.
9. Take away a support back and remove the block of cylinders of the brake mechanism.
10. Screw together the block of cylinders from the union of a brake hose.

Note
Connection of a brake hose with the block of cylinders of the brake mechanism is condensed with a copper washer. Replace strongly pressed out washer new.

11. Examine protective covers of basic plugs. Replace the damaged covers.
12. Examine basic plugs. In the presence of zadir or traces of strong wear turn out and replace basic plugs.
13. Apply UNIOL-2M/1 lubricant or its analog on basic plugs.
14. Establish details as it should be, the return to removal, and remove air from a system hydraulic actuator (see. "Pumping of a hydraulic actuator of the brake system").